Spray pressure variation effect on the properties of CdS thin films for photodetector applications

Herein, we report the photosensing property of CdS thin films. CdS thin films were coated onto glass substrates via a spray pyrolysis method using different spray pressures. Prepared films were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), and optical and photoluminescence spectroscopy. XRD analysis demonstrated the growth of crystalline CdS films with crystallite sizes varying from 26 to 29 nm depending on the pressure. The SEM and EDAX analyses revealed nearly-stoichiometric CdS films with smooth surfaces and slight variation in grain morphology due to pressure changes. Optical measurements showed a direct bandgap varying from 2.37 eV to 2.42 eV due to pressure changes. A photodetector was also fabricated using the grown CdS films; the fabricated photodetector exhibited good performance depending on the spray pressure. A spray pressure of 1.5 GPa resulted in high photoresponsivity and external quantum efficiency.     

Effect of milling ball size on the densification and optical properties of transparent Y2O3 ceramics

In this study, we report highly transparent Y₂O₃ ceramics fabricated by hot-pressing only at 1500 °C without a HIP treatment, featuring in-line transmittance levels of 77% and 84% at a wavelength of 400 and 1100 nm, respectively with the grain size suppressed to 710 nm. The effect of the ball size during the grinding of Y₂O₃ powders on the correlation between the thus-prepared Y₂O₃ powders and the optical properties of the hot-pressed samples is demonstrated for the first time. With a decrease in the diameter of the ZrO₂ balls from 5 mm to 1 mm, the milling efficiency was enhanced and admirable transparency of Y₂O₃ was attained at a short milling time. However, several micron-sized pores remained in the transparent specimens prepared with 1 mm balls, originating from the inhomogeneously packed region of the green body. Finally, the 2 mm was found to be optimum for obtaining a fine-grained and pore-free microstructure with the best in-line transmittance of Y₂O₃ ceramics.     

Improved photoluminescence and multi-mode optical thermometry of Er3+/Yb3+ co-doped (Ba,Sr)3Lu4O9 phosphors

Contactless optical thermometers have attracted extensive attentions for applications in scientific research and technological fields due to their apparent advantages. Herein, a novel sequence of Ba_3-xSr_xLu₄O₉ (B_3-xS_xLO):Er³⁺/Yb³⁺ phosphors were successfully prepared to investigate the temperature sensing property. By establishing energy transfer from Yb³⁺ to Er³⁺ and regulating the local lattice environment, up-conversion luminescence of Er³⁺ is dramatically improved when excited by 980 nm laser. This can effectively promote signal-noise ratio and reduce the errors in temperature detection. Furthermore, a multi-mode optical thermometry, which includes the fluorescence intensity ratio (FIR) from two thermally coupled levels of ²H_11/2/⁴S_3/2, FIR based on non-thermally coupled system of ²H_11/2/⁴F_9/2 and fluorescence lifetime of ⁴S_3/2 state of Er³⁺, was explored systematically. The fabricated samples exhibit the superior temperature measurement performances containing wide temperature-sensing range, superior signal discriminability, high sensitivity and favorable repeatability, indicative of the enormous utilization prospects of B_3-xS_xLO:Er³⁺/Yb³⁺ for thermometry.     

Structural,optical, and electrical properties of tin iodide-based vacancy-ordered-double perovskites synthesized via mechanochemical reaction

Over the recent past, lead-based halide perovskite materials have drawn significant attention due to their excellent optical and electrical properties for solar cells and optoelectronics applications. However, the toxicity of lead elements and instability under ambient conditions leads to develop alternative compositions. Herein, we report a novel mechanochemical synthesis of tin iodide-based double perovskites (A₂SnI₆; A = Rb⁺, Cs⁺, methylammonium, and formamidinium), and their structural, optical, and electrical properties are investigated. Importantly, we found that the hydrogen iodide (HI) addition during the ball-milling process minimizes secondary phase formation in the synthesized A₂SnI₆ powders. The effects of HI addition and the A-site substitution are investigated with respect to the lattice parameters, optical bandgaps, and electrical properties of the synthesized perovskite materials. Our results demonstrate essential information to improve the understanding of halide perovskite materials and develop efficient lead-free perovskite photoelectric devices.     

Controlled growth of Bi-Functional La doped CeO2 nanorods for photocatalytic H2 production and supercapacitor applications

The rapid increase in energy consumption has severely rehabilitated human life urging to develop reliable and environmental friendly energy storage devices. Target oriented, systematic approach has been adopted to synthesis La doped CeO₂ nanostructures with percentage as La_xCe_1-xO₂ (X = 0,1,3,5,7) for potential super capacitors applications. Morphological doping impact on H₂ production, electrochemical and optical properties are thoroughly investigated. XRD studies revealed the crystalline phase purity and attained approximately 35 nm average crystallite size. The SEM images exposed that primary morphology nano-particles has been tuned into nanorods by increasing the La concentration in CeO₂ with size range 40～60 nm. CV graphs depicted that the prepared electrodes obey the pseudo capacitive faradaic reactions behavior in nature. Maximum capacitance (925 F g^-1) has been achieved by La_0·05Ce_0·95O₂ which is better than numerous reported materials. The La_0·05Ce_0·95O₂ also exhibited excellent GCD stability with 87.8% retention exhibiting it suitability for supercapacitor applications. Furthermore, the La_0·05Ce_0·95O₂ showed the significantly higher H₂ (9 μmol h^?1g^?1) production rate as compared to undoped CeO₂ and La_0·01Ce_0·99O_2, La_0·03Ce_0·97O₂ samples. This higher production is attributed to the recombination rate and have strong substantial correlation with optical characteristics.     

Novel one- and two-dimensional InSbS3 semiconductors for photocatalytic water splitting: The role of edge electron states

Photocatalytic water splitting has become a promising technology to solve environmental pollution and energy shortage. Exploring stable and efficient photocatalysts are highly desired. Herein, we propose novel low-dimensional InSbS₃ semiconductors with good stability based on density functional theory. Such InSbS₃ structures could be obtained from their bulk crystal by suitable exfoliation methods. Our calculations indicate that two-dimensional (2D) and one-dimensional (1D) InSbS₃ nanostructures have moderate band gaps (2.54 and 1.97 eV, respectively) and suitable band edge alignments, which represents sufficient redox capacity for photocatalytic water splitting. 2D InSbS₃ monolayer possesses oxygen evolution reaction (OER) activity and 1D InSbS₃ single-nanochain possesses hydrogen evolution reaction (HER) activity under acidic conditions. Interestingly, two edge electron states can be introduced when the dimension of InSbS₃ is reduced from 2D to 1D and the new electron states can exist in arbitrary-width nanoribbons, which can effectively promote the process of HER. Moreover, InSbS₃ monolayer and single-nanochain also exhibit large solar-to-hydrogen efficiency, high carrier mobility, and excellent optical absorption properties, which can facilitate the process of photocatalytic reactions. Our findings can stimulate the synthesis and applications of low-dimensional InSbS₃ semiconductors for overall water splitting.     

Integrated Inspection of QoM,QoP, and QoS for AOI Industries in Metaverses

With the rapid development of information technologies such as digital twin, extended reality, and blockchain, the hype around "metaverse" is increasing at astronomical speed. However, much attention has been paid to its entertainment and social functions. Considering the openness and interoperability of metaverses, the market of quality inspection promises explosive growth. In this paper, taking advantage of metaverses, we first propose the concept of Automated Quality Inspection (AutoQI), which performs integrated inspection covering the entire manufacturing process, including Quality of Materials, Quality of Manufacturing (QoM), Quality of Products, Quality of Processes (QoP), Quality of Systems, and Quality of Services (QoS). Based on the scenarios engineering theory, we discuss how to perform interactions between metaverses and the physical world for virtual design instruction and physical validation feedback. Then we introduce a bottom-up inspection device development workflow with productivity tools offered by metaverses, making development more effective and efficient than ever. As the core of quality inspection, we propose Quality Transformers to complete detection task, while federated learning is integrated to regulate data sharing. In summary, we point out the development directions of quality inspection under metaverse tide.      

Influence of high energy ball milling on structural,microstructural and optical properties of TiO2 nanoparticles

The influence of high-energy ball milling on structural, microstructural, and optical properties of TiO₂ by modifying the nanoparticle size was studied. Five samples were extracted at different milling times (0, 2, 4, 8, and 13 h). The average particle sizes estimated by dynamic light scattering (DLS) were 205, 155.8, 116.8, 82.9, and 82.7 nm at 0, 2, 4, 8, and 13 h, respectively. X-ray diffraction analysis confirmed progressive broadening of the peaks as the milling time elapsed. Besides, a correlation was found between d spacing and the average crystal size. The UV–Vis diffuse reflectance spectra of TiO₂ revealed a decrease in reflectance due to particle size reduction. Similarly, an alteration of the bandgap transition energy was presented, whose values gradually decreased from 2.966 eV to 2.861 eV for the sample without and with the maximum duration milling performed (13 h), respectively. Likewise, the SEM analysis showed a distribution in nanoparticle size that became more homogeneous and smaller average grain size as the milling duration was longer.     

Importance of optical homogeneity for high-quality transparent ceramics

Two types of transparent Y₂O₃ ceramics without including large scattering sources such as residual pores, one with very high optical homogeneity (type A) and another one with slightly insufficient optical homogeneity (type B), are purposely prepared, and their optical properties are investigated and compared qualitatively and quantitatively. Type A ceramic exhibits transmittance characteristics with very low internal loss in the visible to infrared wavelength region, while type B ceramic is inferior in various optical performances especially in the short (visible) wavelength region. In type B ceramic, birefringence occurs due to optical inhomogeneity in the visible region, resulting in a decrease in the extinction ratio. Non-uniform refractive index distribution is also observed in the Schlieren image of type B ceramic, hence the laser beam quality through that material is degraded. This study proved the importance of optical homogeneity of transparent ceramics and clarified the problems in actual applications.     

Determination of optical and structural properties of lithium silicate ceramics with different ratios of Sm doped

In this study, the synthesis and luminescence characterization of Samarium (Sm³⁺) doped lithium metasilicate (Li₂SiO₃) phosphor ceramic were investigated. It was presented and discussed the results obtained on the luminescence and other optical studies such as X-ray diffraction (XRD), optical absorption and luminescence properties of Li₂SiO₃:Sm³⁺ phosphor ceramic. The Li₂SiO₃ compound was shown a characteristic phase in XRD. The doping in the lithium compound was not having a significant effect on the basic crystal structure of the material. The maximum photoluminescence (PL) emission for Sm³⁺ doped Li₂SiO₃ was observed at 554, 583, 641, 725 nm and bore resemblance to the visible region of the spectrum. The glow curves of all synthesized materials have a complex peak structure after being irradiated with a ⁹⁰Sr–⁹⁰Y beta source. In addition, the peak between 400 and 600 nm was seen in the radioluminescence (RL) spectrum because of a wide peak thought to be caused by silicate.